Home
»
Gas Hot Water Pressure Washers
»
Mi-T-M HG-3004-3460 | 3000 PSI-3.9 GPM Natural Gas Hot Water Belt Drive Pressure Washer | 460V 10.0A
Mi-T-M HG-3004-3460 | 3000 PSI-3.9 GPM Natural Gas Hot Water Belt Drive Pressure Washer | 460V 10.0A
Regular price
$10,077.00
Regular price
-8%
$10,897.00
Sale price
$10,077.00
Free shipping (Over $100)
Taxes included in Price
Made In the U.S.A
Ask an expert!
Mi-T-M HG Series Natural Gas/LP Belt Drive Hot Water HG-3004-3460
Mi-T-M HG-3004-3460
The stationary HG Series, fueled by a reliable energy source, is the premier solution for wash bays, consistently providing exceptional performance.
Pump
Factory preset trapping unloader
Thermal relief valve
Adjustable high pressure detergent injector
Motor
Open drip-proof motor electric motor with thermal overload protection
Frame
Powder coated steel side panels and frame
Components
Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack
24 volt control system
1/2-inch schedule 80-coil heat exchanger
Electronic ignition with an intermittent pilot
Adjustable thermostat
Miscellaneous
Maximum outlet temperature is 200°F (250°F/121°C outlet temperature with steam option)
Unit Includes
Quick connect nozzles - 0°, 15°, 25° and 40°
50-foot x 3/8-inch steel wire-braided hose
Adjustable pressure insulated dual lance with trigger gun

Additional Options
Options
Options - must be ordered with unit and cannot be added later.
HX-0104 K7 Unloader, Flow Activated - Auto Start/Stop N/A
Converts pressure trapping unloader system to flow actuated K7 unloader. Pressure is not trapping in the discharge line when trigger is released
HX-0105 Liquid Propane - Vapor Only
Converts natural gas pressure washer to operate on liquid propane (vapor only)
HX-0106 Hour Meter
Displays the number of hours unit has been in operation
HX-0107 Time Delay Shutdown
Timer will shut unit off automatically when trigger gun is released and timer reaches setting **Consult factory before ordering this option.**
HX-0108 (1) Remote Station - Auto Start/Stop N/A
Adds control box which may be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option.**
HX-0109 Time Delay Shutdown and First Remote Box
Timer will shut unit off automatically when trigger gun is released and timer reaches setting; Adds control box which may be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option.**
HX-0110 Additional Remotes - Up To 3
Additional remotes that may be added to unit after the first remote is installed
HX-0111 Auto Start/Stop
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart
HX-0121 250°F Steam Upgrade
Steam option adjusts unloader valve counter-clockwise increasing outlet temperature to 250°F while lowering system pressure
HX-0124 Auto Start/Stop and First Remote Option
When trigger gun is released timer will turn unit off, when trigger gun is pulled unit will restart; Adds control box which may be mounted away from unit to control on/off, burner and soap injection
HX-0296 Programmable Logic Controller
Includes auto start/ stop and timed lockout
HX-0297 Programmable Logic Controller with First Remote
Includes auto start/stop, timed lockout and detergent solenoid
HX-0299 Auto Start/Stop and First Remote Option - Metal Control Box
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled, unit will restart; Adds metal control box, may be mounted away from unit to control on/off, burner and soap injection
HX-0288 (1) Remote Station (Auto Start/Stop Not Available), Metal Control Box
Adds plastic control box with rocker switches, can be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option**
HX-0289 Time Delay Shutdown and First Remote, Metal Control Box
Timer will shut unit off automatically when trigger gun is released and timer reaches setting; adds metal control box with rocker switches, can be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option**
HX-0290 Addition Remotes (Up to 3), Metal Control Box
Additional metal control boxes with rocker switches, can be added to unit after the first remote is installed
HX-0304 Programmable Logic Controller with First Remote, Metal Control Box
Includes auto start/stop and timed lockout
HX-0305 Additional Programmable Logic Controller Remotes, Plastic Control Box
Adds additional remotes to PLC
HX-0306 Additional Programmable Logic Controller Remotes, Metal Control Box
Adds additional remotes to PLC
Specifications
| PSI | 3000 |
| GPM | 3.9 |
| Displacement/ Engine | 8.0 HP, 460V, 3Ø, 10.0A |
| Pump | General |
| Natural Gas BTU Per Hour | 338,000 |
| LP Gas BTU Per Hour | 326,000 |
| Draft Diverter | 21 in. |
| Net Weight | 758.00 lbs. |
| Length | 56.50 in. |
| Width | 29.00 in. |
| Height | 49.75 in. |
