Home
»
Gas Hot Water Pressure Washers
»
Mi-T-M HG-3004-1230 | 3000 PSI-3.9 GPM Natural Gas Hot Water Belt Drive Pressure Washer | 230V 37.0A
Mi-T-M HG-3004-1230 | 3000 PSI-3.9 GPM Natural Gas Hot Water Belt Drive Pressure Washer | 230V 37.0A
Regular price
$10,059.00
Regular price
-9%
$10,997.00
Sale price
$10,059.00
Free shipping (Over $100)
Taxes included in Price
Made In the U.S.A
Ask an expert!
Mi-T-M HG Series Natural Gas/LP Belt Drive Hot Water HG-3004-1230
Mi-T-M HG-3004-1230
The stationary HG Series, powered by a consistent fuel supply, stands out as the top option for wash bays, ensuring reliable performance with every use.
Pump
Factory preset trapping unloader
Thermal relief valve
Adjustable high pressure detergent injector
Motor
Open drip-proof motor electric motor with thermal overload protection
Frame
Powder coated steel side panels and frame
Components
Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack
24 volt control system
1/2-inch schedule 80-coil heat exchanger
Electronic ignition with an intermittent pilot
Adjustable thermostat
Miscellaneous
Maximum outlet temperature is 200°F (250°F/121°C outlet temperature with steam option)
Unit Includes
Quick connect nozzles - 0°, 15°, 25° and 40°
50-foot x 3/8-inch steel wire-braided hose
Adjustable pressure insulated dual lance with trigger gun

Additional Options
Options
Options - must be ordered with unit and cannot be added later.
HX-0104 K7 Unloader, Flow Activated - Auto Start/Stop N/A
Converts pressure trapping unloader system to flow actuated K7 unloader. Pressure is not trapping in the discharge line when trigger is released
HX-0105 Liquid Propane - Vapor Only
Converts natural gas pressure washer to operate on liquid propane (vapor only)
HX-0106 Hour Meter
Displays the number of hours unit has been in operation
HX-0107 Time Delay Shutdown
Timer will shut unit off automatically when trigger gun is released and timer reaches setting **Consult factory before ordering this option.**
HX-0108 (1) Remote Station - Auto Start/Stop N/A
Adds control box which may be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option.**
HX-0109 Time Delay Shutdown and First Remote Box
Timer will shut unit off automatically when trigger gun is released and timer reaches setting; Adds control box which may be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option.**
HX-0110 Additional Remotes - Up To 3
Additional remotes that may be added to unit after the first remote is installed
HX-0111 Auto Start/Stop
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart
HX-0121 250°F Steam Upgrade
Steam option adjusts unloader valve counter-clockwise increasing outlet temperature to 250°F while lowering system pressure
HX-0124 Auto Start/Stop and First Remote Option
When trigger gun is released timer will turn unit off, when trigger gun is pulled unit will restart; Adds control box which may be mounted away from unit to control on/off, burner and soap injection
HX-0296 Programmable Logic Controller
Includes auto start/ stop and timed lockout
HX-0297 Programmable Logic Controller with First Remote
Includes auto start/stop, timed lockout and detergent solenoid
HX-0299 Auto Start/Stop and First Remote Option - Metal Control Box
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled, unit will restart; Adds metal control box, may be mounted away from unit to control on/off, burner and soap injection
HX-0288 (1) Remote Station (Auto Start/Stop Not Available), Metal Control Box
Adds plastic control box with rocker switches, can be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option**
HX-0289 Time Delay Shutdown and First Remote, Metal Control Box
Timer will shut unit off automatically when trigger gun is released and timer reaches setting; adds metal control box with rocker switches, can be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option**
HX-0290 Addition Remotes (Up to 3), Metal Control Box
Additional metal control boxes with rocker switches, can be added to unit after the first remote is installed
HX-0304 Programmable Logic Controller with First Remote, Metal Control Box
Includes auto start/stop and timed lockout
HX-0305 Additional Programmable Logic Controller Remotes, Plastic Control Box
Adds additional remotes to PLC
HX-0306 Additional Programmable Logic Controller Remotes, Metal Control Box
Adds additional remotes to PLC
Specifications
| PSI | 3000 |
| GPM | 3.9 |
| Displacement/ Engine | 8.0 HP, 230V, 1Ø, 37.0A |
| Pump | General |
| Natural Gas BTU Per Hour | 338,000 |
| LP Gas BTU Per Hour | 326,000 |
| Draft Diverter | 21 in. |
| Net Weight | 758.00 lbs. |
| Length | 56.50 in. |
| Width | 29.00 in. |
| Height | 49.75 in. |
